Micarelli Music

White with red tortoise-pearl pickguard, 2 single coil pickups, F-key tuners, F-series neck plate, Dynamic Fender Vibrato, Maple neck with rosewood fingerboard, Two slider switch On-Off-Phase for each of the two pickups. Neck stamped May, 1966. This one has seen some use, so check the photos carefully. A small piece of the pickguard is missing, lots of checking in the finish as well as some nicks and scratches. Still plays and sounds wonderful.

Sonic Blue, Alder Body, “C” Shaped Maple Neck, Rosewood Fingerboard, Three Alnico 3 Pickups, 22 Jumbo Frets, Satin Finish, Made in U.S.A.

Daphne Blue, 3 Alnico V Pickups, Rosewood Fingerboard, 22 Medium Jumbo Frets, 9.5″ Neck Radius, Hardshell Case.

Light Ash, Heavy Relic Thin Skin Lacquer Body, Quarter Sawn Maple Neck with Worn Lacquer Finish and 1969 U Back Shape, Big Peg Headstock with 1969 Decal, 21-6105 Frets, 9.5″ Radius, Bone Nut, Fat 50’s Pickups, 5 Way Selector Switch, Vintage Relic’d Bridge, Schaller F Tuners, Chrome Relic’d Hardware, 3 Ply Mint Green Pickguard, Deluxe Black Tolex with Crushed Black Velvet Case.

The Univox Hi-Flier was manufactured by Univox and Unicord from 1968 to 1978. It was based in appearance to the Mosrite Ventures guitar. Plywood/Poplar Body, Sunburst Finish, Bolt On Neck, Two Humbucker Pickups. Phase Three Models were made between 1974 and 1977.
A few nicks and scratches, overall very nice shape.

Sonic Blue, Lightweight Ash Body, Heavy Relic Thin Skin Lacquer Finish, Neck Style 57 Soft V, 9.5 Radius, Bone Nut,
Dunlap 6105 Fret Wire, Neck Pickup: 69 Strat NOS, Middle Pickup: Strat Fat 50′S Mid Custom, Bridge Pickup: Texas Special Bridge Custom, Limited Edition Deluxe Custom Shop Case, Limited Edition Certificate.

Fiesta Red, Lightweight Ash Body, Heavy Relic Thin Skin Lacquer Finish, Neck Style 57 Soft V, 9.5 Radius, Bone Nut, Dunlap 6105 Fret Wire, Neck Pickup: 69 Strat NOS, Middle Pickup: Strat Fat 50′S Mid Custom, Bridge Pickup: Texas Special Bridge Custom, Limited Edition Deluxe Custom Shop Case, Limited Edition Certificate.

Basswood body, Bolt-on maple neck, Rosewood block markers, 24 3/4″ scale length, 1 5/8″ nut, Dual Hot-Rail humbucking pickups, 3 way position selector, 2 Volume, 2 Tone controls, Tune-O-Matic bridge, Vintage style open back tuners.
Official re-issue SUPRO® Dual Tone. SUPRO® Guitars were made in the USA from 1958-68 by VALCO and sold through Montgomery Ward. VALCO also made National and AIRLINE brands.
This guitar is brand new, but was dropped while being unpacked. The chip has been filled, and painted, but is still slightly noticeable.